Control Chief TM6000 Návod k obsluze stáhnout pdf (Strana 81)

TM 10-3930-660-10

0006 00-11

OPERATION UNDER UNUSUAL CONDITIONS - CONTINUED 0006 00

EMERGENCY BOOM OPERATIONS

WARNING

If engine power is lost with the boom extended or raised, the boom must be fully retracted before it is

lowered to prevent severe personal injury and vehicle damage.

NOTE

Contact Maintenance to perform the necessary preparation of the 6K forklift for emergency boom oper-

ations.

1. Emergency Boom Retracting

. Whenever an emergency situation prevents the use of engine power for retracting the

boom, proceed with the following:

a. Remove the transmission cover.

b. Remove the steer cylinder crossover tow hose from the dummy tee fitting, located on the main frame crossbar at the

rear of the transmission. Install caps on the dummy tee (two small caps are located in the tool box as part of the emer-

gency lift/retract kit).

c. Assemble the #8 nut and the #8-6 reducer to the union (parts are from the emergency lift/retract kit) and install the

assembly on one end of the tow hose.

d. Assemble the #12 nut and the #12-6 reducer to one end of the #12 tee fitting (parts from the emergency lift/retract kit)

and install on the other end of the tow hose. Install a #12 cap on branch of the tee fitting. Tighten all connections.

409-055

CYLINDER

CROSSOVER

TOW HOSE

DUMMY

TEE

FITTING

#8 UNION

#8 NUT

#12 NUT

#12 CAP

#12 TEE

TOW HOSE

#12-6 REDUCER

#8-6 REDUCER

STEER

EMERGENCY LIFT/RETRACT KIT

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 200 201

Žádné komentáře

Control Chief TM6000 Návod k obsluze Strana 81