Control Chief TM6000 Návod k obsluze stáhnout pdf (Strana 42)

TM 10-3930-660-10

0004 00-4

DESCRIPTION AND USE OF OPERATOR CONTROLS AND INDICATORS - CONTINUED 0004 00

CAB DOOR AND INSTRUMENT PANEL CONTROLS AND INDICATORS - CONTINUED

KEY CONTROL OR INDICATOR FUNCTION

1 Water Temperature Gauge Indicates temperature of the engine water and coolant. Normal

operating temperature of water/coolant is between 180°F (82°C)

and 210°F (99°C).

2 Engine Oil Pressure Gauge Indicates the oil pressure of the engine. Normal oil pressure at

operating temperature and maximum governed rpm is between 30

psi (207 kPa) and 80 psi (552 kPa).

3 Transmission Oil Temperature Gauge Indicates the temperature of the transmission oil. The temperature

must not exceed 250

°F (121°C). If the temperature reaches 250°F

(121°C) or the warning light illuminates, move the transmission

range select lever to NEUTRAL and run the engine at low idle

(between 1,000 and 1200 rpm). Within two or three minutes, the

temperature should drop to normal values. If not, stop the vehicle

and correct the problem before continuing.

4 Fuel Gauge Indicates the fuel level in the fuel tank.

5 Voltmeter Indicates voltage of the electrical system. Normal operating

voltage is between 24 and 28.5 volts.

6 Hourmeter Records the hours of vehicle operation. Used to schedule periodic

maintenance procedures.

409-010

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 200 201

Žádné komentáře

Control Chief TM6000 Návod k obsluze Strana 42