Control Chief TM6000 Návod k obsluze stáhnout pdf (Strana 75)

TM 10-3930-660-10

0006 00-5

OPERATION UNDER UNUSUAL CONDITIONS - CONTINUED 0006 00

OPERATE IN EXTREME COLD - CONTINUED

NOTE

The engine primer will not function at temperatures above 1.1°C (+/- –13°C).

b. If the engine does not start, turn the emergency steering pump switch off (switch up).

CAUTION

Do not depress the engine primer button for more than 5 seconds. Failure to follow this precaution could

result in forklift damage.

c. Crank the engine and press the engine primer button for no longer than 5 seconds. This injects a measured

amount of starting fluid into the engine.

d. Release the engine primer button and continue to crank engine.

e. If engine fails to start, repeat steps c and d.

f. After starting the engine, run at half throttle until engine warms to normal temperature (180

°-190°F) (82°-

°C).

g. Use the hydraulic joystick control lever to raise the boom until the forks are 6 in. (152 mm) from the ground and fully

retract the boom.

409-048

PRIMER

BUTTON

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 200 201

Žádné komentáře

Control Chief TM6000 Návod k obsluze Strana 75