Control Chief TM6000 Návod k obsluze stáhnout pdf (Strana 134)

TM 10-3930-660-10

0012 00-10

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED 0012 00

Table 1. Preventive Maintenance Checks and Services (PMCS) for 6K Forklift - Continued.

Item

No. Interval

Man-

Hours

Location

Procedure

NOT FULLY MISSION

CAPABLE IF:

Item To

Check/

Service

29 During Brakes a. Check brakes for pulling,

grabbing or reduced braking

capacity.

Brakes pull, grab or exhibit unsafe

operation.

b. Check parking brake operation

with engine idling and trans-

mission in a forward gear.

Parking brake will not hold fork-

lift.

30 During Steering Check for smooth, controlled

steering without pulling or drift-

ing.

Steering is erratic.

31 During Drive

Train

Monitor forklift operation for

unusual noise or vibrations from

engine transmission, drive-

shafts, and wheels.

32 During Overall

Leakage

Be alert for evidence of fluid

leaks.

Class III engine oil, coolant or

hydraulic oil leaks are evident.

Any fuel or oil leaks from brakes

is evident.

WARNING

• If NBC exposure is suspected, personnel wearing protec-

tive equipment should handle all air cleaner media. Consult

your NBS Officer or NBC NCO for appropriate handling

or disposal procedures.

• NBC contaminated filters must be handled using adequate

precautions as described in FM 3-11.4, Multiservice Tactics,

Techniques, and Procedures for Nuclear, Biological, and

Chemical (NBC) Protection, and must be disposed of by

trained personnel.

CAUTION

When operating in desert or extremely dusty condition, clean

the primary air cleaner element after every 4 hours of opera-

tion.

REAR

33 After Primary

Air

Cleaner

Element

Clean primary air cleaner ele-

ment as necessary (WP 0017 00).

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 200 201

Komentáře k této Příručce

Žádné komentáře

Control Chief TM6000 Návod k obsluze Strana 134

Komentáře k této Příručce